High Temperature Heat Resistant Rubber Conveyor Belt (EP NN)HUAYUE® Heat resistant Conveyor Belt used by the multi-layer polyester (or to the polyester, polyester weft for amine) bond canvas with a certain way, up and down the high-strength plastic cover, good wear-resistant flexible rubber.
Ply: 1-10
Top Rubber Cover: 1.5-10mm
Bottom Rubber Cover: 1.5-10mm
Belt Width:100-2200mm
Color: Black
Edge:Mould Edge or Cut Edge
CASTING PLY MATERIAL: NN(NYLON), EP(POLYESTER), CC(COTTON), ST (Steel cord) FOR SELCETION.
Advantage:
1. Natural rubber Thin belt body with high strength, light weight.
2. Anti-abrasive, impact resistant, corrosion resistant
3. Softy belt body, good flexibility, excellent trough.
4. Vulcanization molding
5. Long service life
Characteristics:
1.Good elasticity, anti-shock, anti-abrasive
2.High adhesion, good flexibility and trough ability;
3.Better stability of size and heat-resistance
4.Good water-proof ability, little change in strength under dry or wet conditions
HUAYUE conveyor belt has over 10 key types according to the use classification:
- Flat normal type
- Chevron Pattern type
- V-belt pattern type
- Nylon casing ply type
- Heat /cold resistant type
- Oil resistant type
- Flame resistant type ( self- extinguishing type)
- Chemical resistant type
- Anti shock type
- Anti-abrasive type
HUAYUE® conveyor belts carry out a wide range of conveyor tasks in all industries. It has been over 30 years history since 1986. Passed SGS, BV, ISO. Honored CHINA FAMOUS BRAND in 2014.
Standards |
Cover Rubber |
Adhesion |
Tensile Strength |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
DIN 22102 |
Mpa |
% |
mm3 |
N/mm |
N/mm |
(<=1.5mm) |
(>1.5mm) |
DIN 22102-Z |
15 |
350 |
250 |
3.5 |
4.5 |
DIN 22102-W |
18 |
400 |
90 |
3.5 |
4.5 |
DIN 22102-Y |
20 |
400 |
150 |
3.5 |
4.5 |
DIN 22102-X |
25 |
450 |
120 |
3.5 |
4.5 |
Standards |
Cover Rubber |
Adhesion |
Tensile StrengTD |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
AS 1332 |
Mpa |
% |
mm3 |
N/mm |
N/mm |
N/mm |
(<=1.9mm) |
(>1.9mm) |
AS 1332-N17 |
17 |
400 |
200 |
4 |
4.8 |
6 |
AS 1332-M24 |
24 |
450 |
125 |
4 |
4.8 |
6 |
Standards |
Cover Rubber |
Adhesion |
Tensile StrengTD |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
RMA |
Mpa |
% |
mm3 |
N/mm |
N/mm |
N/mm |
(<=1.6mm) |
(>1.6mm) |
RMA-I |
17 |
400 |
|
3 |
4.4 |
4 |
RMA-II |
14 |
400 |
|
3 |
4.4 |
4 |
Standards |
Cover Rubber |
Adhesion |
Tensile StrengTD |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
SANS 1173 |
Mpa |
% |
mm3 |
N/mm |
N/mm |
A |
18 |
400 |
70 |
5 |
7 |
C |
20 |
400 |
150 |
5 |
7 |
M |
25 |
450 |
120 |
5 |
7 |
N |
17 |
400 |
150 |
5 |
7 |