Ep150 Rubber Conveyor Belt with 3 Ply

• Customization: Available
• Type: EP150
• Material: Rubber
• Model NO.: EP150
• Inside Material: Polyester
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Plies: 3-10
• Types: Ep100 Ep125 Ep150 Ep200 Ep250 Ep300
• Certificate: ISO9001 BV SGS
• Width: 400-2200mm
• Transport Package: PVC Water Proof Cloth
• Specification: SGS BV ISO
• Trademark: HUAYUE
• Origin: Baoding City Hebei Province China
• HS Code: 40101200
• Production Capacity: 5000 Meters Per Day

Product Description

EP150 rubber conveyor belt with 3 PLY 

Features:
Good flexibility, groove formation property and cost-effective. It is mainly used to transport powder,small and medium granular or less wearing materials at common temperature.
Structure:
It uses multi-layer cotton canvas or terylene cotton canvas as carcass and finished through the processes of calendering,firming and vulcanizing,etc
Conveying small and not large massiveness materials, meanliness materials and biscuit materials. Applicable for conveying long and not very long distance materials, weight materials and materials that is vey long and its sliding rate is very fast.
 
Detailed Product Description
1.plies:3-10ply
2:width:400-2200mm
3.thickness:8-30mm
4.Tensile Strength: 9-25MPA
5.quality control:ISO9001:2008,BV
6. high-performance characteristic:resistance to abrasion  
 

Physical Properties of Rubber Cover (before aging) of EP Nylon Conveyor Belt

Grade	Tensile Strength/Mpa ≥	Breaking Elongation/% ≥	Abrasion Loss/mm3 ≤
H	24	450	120
D	18	400	100
L	15	350	200
Note: Grade H-used for transporting sharp, abrasive materials which can damage belts badly. Grade D-used for transporting highly abrasive materials. Grade L-used for transporting medium-abrasion materials.

After-aging properties of rubber cover(70ºC, 7days):

Tensile strength and breaking elongation are both not lower than 75% of before-aging values.

 

Full-thickness Tensile Properties

a. Longitudinal tensile strength, not less than the below table. (N/mm)

Nominal belt type	160	200	250	315	400	500	630
	800	1000	1250	1600	2000	2500	3150

 

b. Full thickness, longitudinal elongation at reference force, not more than 4%.

c. Ply adhesion:

Item	Ply to ply	Rubber cover to ply
		Rubber cover thickness ≤1.5mm	Rubber cover thickness >1.5mm
All samples average value/ (N/mm) ≥	4.5	3.2	3.5
All samples min peak value/ (N/mm) ≥	3.9	2.4	2.9
Note: All samples max peak value is not more than 20N/mm.

d. Straightness not more than 25mm