Heavy-duty corrugated sidewall skirt conveyor belt
HUAYUE heavy duty long distance cleat sidewall conveyor belts mianly for transport of bulk goods offer high-quality long-term high-incline conveyance solutions.
Rubber conveyor belt:
1.Ply:1-10plies
2.Width:120-2200mm
3.Thickness: 6-40mm
4. Cover Tensile Strength: 8-25MPA
Huayue® cleat sidewall conveyor belts have following system advantages:
No Transfer Points
No Spillage with steep angle conveying.
Maximum utilisation of space.
Minimum Maintenance, Long Belt Life.
Wide Range of Materials can be handled.
Low Power Requirement, Quiet Smooth Running.
Cleat of sidewall conveyor belt
Cleat types: T, TC
The cleat is made of enforced fabric, solid, anti-shock to avoid distortion.
"T" cleat are normally used up to 40 degree
"TC" normally used from 0 degree to 90 degree
Properties of cleat sidewall conveyor belt
Corrugated sidewall belts for transport of bulk goods
Saves space, since conveyance at inclines of up to 90° is possible
Material conveyed is protected
Extremely high stability is provided in the traverse direction, good longitudinal flexibility
Different feed and discharge directions are possible by rotating the vertical runs
Applications of large angle cleat sidewall conveyor belt
(Corrugated Sidewall conveyor belt) Large Angle Conveyor belt is widely used in Metallurgy, Mining, Electricity, Coal, Foundries, Construction, Food, Cement, Fertilizer, Copper, Pig Iron Ores, Sponge Iron Reserves etc.
We are top 10 manufacturer in China, 30 years history since 1986.
Welcome enquiry HUAYUE!
Standards |
Cover Rubber |
Adhesion |
Tensile Strength |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
DIN 22102 |
Mpa |
% |
mm3 |
N/mm |
N/mm |
(<=1.5mm) |
(>1.5mm) |
DIN 22102-Z |
15 |
350 |
250 |
3.5 |
4.5 |
DIN 22102-W |
18 |
400 |
90 |
3.5 |
4.5 |
DIN 22102-Y |
20 |
400 |
150 |
3.5 |
4.5 |
DIN 22102-X |
25 |
450 |
120 |
3.5 |
4.5 |
Standards |
Cover Rubber |
Adhesion |
Tensile StrengTD |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
AS 1332 |
Mpa |
% |
mm3 |
N/mm |
N/mm |
N/mm |
(<=1.9mm) |
(>1.9mm) |
AS 1332-N17 |
17 |
400 |
200 |
4 |
4.8 |
6 |
AS 1332-M24 |
24 |
450 |
125 |
4 |
4.8 |
6 |
Standards |
Cover Rubber |
Adhesion |
Tensile StrengTD |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
RMA |
Mpa |
% |
mm3 |
N/mm |
N/mm |
N/mm |
(<=1.6mm) |
(>1.6mm) |
RMA-I |
17 |
400 |
|
3 |
4.4 |
4 |
RMA-II |
14 |
400 |
|
3 |
4.4 |
4 |
Standards |
Cover Rubber |
Adhesion |
Tensile StrengTD |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
SANS 1173 |
Mpa |
% |
mm3 |
N/mm |
N/mm |
A |
18 |
400 |
70 |
5 |
7 |
C |
20 |
400 |
150 |
5 |
7 |
M |
25 |
450 |
120 |
5 |
7 |
N |
17 |
400 |
150 |
5 |
7 |